Instructions For Use - Gaymar Medi-Temp III FW600 Blood/Fluid Warmer Serie Manual Del Operador

3.0 Instructions for Use

(see figures 3—5)
• Attach warming unit to IV pole and secure
with clamp on side of unit.
• Plug the power cord into a properly
grounded outlet.
• Remove the warming set from it's sterile
packaging
NOTE: The flexible warming set is designed so
it can be inserted into the warmer in only one
orientation. Orient the cassette so that the blue
guide rail is inserted into the bottom of the
warming unit.
Œ
Grasp each rail (see figure 4). Stretch the flexible
cassette slightly and insert the front end of the
cassette into the front of the warming unit, with
the blue guide rail facing down. Align the rails to
each of the slotted openings.
4
ENGLISH
Move hands to the rail protrusions and continue
to insert the cassette until the clear guide rail is
almost flush with the front of the unit. (The blue
guide rail will protrude slightly for easy removal.)
Figure 5—Setup instructions
Figure 4—Inserting the cassette