Scale Configurations - OHAUS VF Serie Manual De Instrucciones

VF Series Floor Scales
3.2 Non-certifiable Application
The weighing platform can also be operated without ramps or foot plates in case of non-certifiable applications.
3.3 Connecting the Indicator
1) Route the load cell connection cable to the indicator.
Caution: Ensure the connection cable is protected against possible damage when routed to the indicator.
2) Consult the installation instructions of the indicator for the steps involved in attaching the indicator (if not
already connected).
3) Connect the load cell connection cable to the indicator in accordance with the following table:
Indicator
EXC+ (IN+)
SEN+
SIG+ (OUT+)
SIG- (OUT-)
SEN-
EXC- (IN-)

4. SCALE CONFIGURATIONS

The floor scales are configured ex-factory as follows:

Verifiable

Single Range 1 x 3000 e
If allowed, the following configurations can be set through the indicator setup menu (please refer to the installation
instructions of the indicator):
Types
VFP / VFS-xx300
VFP / VFS-xx600
VFP / VFS-xx1500
VFP / VFS-xx3000
* Non-approval resolution depends on the A/D converter of the indicator
Color
Grey
Yellow
White
Brown
Green
Blue
Maximum Capacity
300kg
600kg
1500kg
3000kg
Verification Scale Interval
Approvable
0.1kg
0.2kg
0.5kg
1kg
EN-2
Non-approvable*
0.1 / 0.05 / 0.02kg
0.2 / 0.1 / 0.05kg
0.5 / 0.2 / 0.1kg
1 / 0.5 / 0.2kg