Troubles - Euroflex Monster IS 60 Manual De Instrucciones

Troubles

In case of faults, or faulted appliance or if
you suspect the appliance has been dam-
aged after falling down, immediately pull the
plug out of the mains socket.
Repairs must be carried out only at an au-
thorised Service Centre. Repairs carried out
by unskilled personnel may result in serious
dangers for the user.
We take no responsibilities for damages
caused by repairs carried out by unskilled
personnel. Unauthorized repairs terminates
the warranty.
If the problem cannot be solved with the help
of the table below, call an authorized service
centre in your area.
Problem
No steam is generated
The soleplate is cold
The soleplate drips
Possible reason
There is no water in the wa-
ter tank
The iron is not ready to use
The iron is not on
Temperature control is on
position •
The soleplate is too cold to
steam iron
28
Possible Solution
Refill the iron wit water (see
page 24)
The iron warms up in ca.2
minutes; look at the light in-
dicator
Set the temperature control
to wished temperature (see
pages 23/25)
Set the temperature control
to wished temperature (see
pages 23/25)
Set the temperature control
to area between
(See page 23)
and •••.