Outside Back Exhaust - GE CVM521P2MS1 Instrucciones De Instalación

B

OUTSIDE BACK EXHAUST

INSTALLATION OVERVIEW
B1.
B2.
B3.
B4. Adjust Blower
B5. Mount the Microwave Oven
PREPARING THE REAR WALL
B1.
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for
outside exhaust.
plate.
• Cut the opening, following the instructions of the
16
Installation Instructions
(Horizontal Duct)
ATTACH THE MOUNTING
B2
PLATE TO THE WALL
A
C
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud. Recommended locations on the mounting
1
Remove the toggle wings from the bolts.
2 Insert the bolts into the mounting plate through
reattach the toggle wings to
B
D
onto each bolt.
3 4