Fitting The Trimmer Guard And Trimmer Head; Fitting The Trimmer Guard And Trimmer Head (T22Lcs) - McCulloch T22LCS Manual De Instrucciones

Fitting the trimmer guard and
trimmer head (T22LS)
• Fit the correct trimmer guard (A) for use with the
trimmer head. Hook the trimmer guard/combination
guard onto the fitting on the shaft and secure with the
bolt (L).
• Fit the drive disc (B) on the output shaft.
• Turn the blade shaft until one of the holes in the drive
disc aligns with the corresponding hole in the gear
housing.
• Insert the locking pin (C) in the hole to lock the shaft.
• Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
H
• To dismantle, follow the instructions in the reverse
order.
Fitting the trimmer guard and
trimmer head (T22LCS)
• Fit the guard as shown in the diagram. Tighten
securely.
ASSEMBLY
L
A
A
• Fit the dust cup on the shaft. The nut must be
completely covered by the dust cup.
B
C
• Hold the dust cup with a spanner to prevent the shaft
from rotating.
• Screw the trimmer head onto the shaft.
–
English 11