EYENIMAL CLASSIC dog Fence Manual De Instrucciones página 7

● Adjusting the boundary range: warning area and static correction area
Adjustment buttons on the transmitter enable you to increase or decrease the width of the warning and static correction zones depending on
the configuration of your yard and how the wire is laid.
The width of the warning zone is adjustable by using the central button located on the front of the transmitter (ref. Diagram 1).
The warning zone is adjustable from 1.3 ft to 20 ft (approx.) on each side of the wire.
A graduation from 0 to 10 helps you to define the width of the zone according to your needs (0 = approx. 1.3 ft – 10 = approx. 20 ft).
The static correction zone is adjustable by using the 3-position switch located on the front of the transmitter (ref. Diagram 1).
approx. 1 ft (on each side of the wire)
approx. 2.62 ft (on each side of the wire)
approx. 5 ft (on each side of the wire)
IMPORTANT
Detection distances vary depending on the length of antenna wire laid out on the property.
The widths indicated are approximate and vary depending on the configuration of each installation. The longer the antenna wire, the
narrower the zones.
Diagram 6
Activate/deactivate
the receiver collar
with the magnetic key
- 5 -