What If There Are Problems; Disposal - Beurer BM 28 Instrucciones De Uso

10. What if there are problems?

Error Possible cause Solution
mes-
sage
Unable to re-
cord a pulse.
You moved or
spoke during
the measure-
ment.
The cuff was
not attached
correctly.
An error oc-
curred during
the measure-
ment.
Please wait one minute and
repeat the measurement.
Ensure that you do not speak
or move during the measure-
ment.
Please observe the informa-
tion in chapter "Attaching
the cuff".
Please wait one minute and
repeat the measurement.
Ensure that you do not speak
or move during the measure-
ment.
Error Possible cause Solution
mes-
sage
The inflation
pressure is
higher than
300 mmHg.
There is a sys-
tem error.
The batteries
are almost
empty.

11. Disposal

Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper opera-
tion can no longer be guaranteed in this case.
• Do not open the device. Failure to comply will invalidate
the warranty.
37
Please take another meas-
urement to check whether
the cuff can be correctly
inflated.
Make sure that neither your
arm nor other heavy objects
are pressing on the line, and
that the line is not bent.
If this error message ap-
pears, please contact Cus-
tomer Services.
Insert new batteries into the
device.