Care And Maintenance; List Of Spare Parts For Blue Max Mini Type; Spare Parts - Hettich BlueMax Mini Typ 2 Instrucciones De Servicio

6.0 Care and maintenance / 7.0 List of spare parts

6.0 Care and maintenance

Guiding tubes must be cleaned of dust at regular intervals. Grease
guiding tubes with 2-3 drops of machine oil only after prolonged
down-times.
All drill bit shanks must be thinly coated with grease before inserting
then into the chucks. This is to ensure that the drill bits can be
inserted and removed with ease.
The machine itself must be cleaned in the proper manner at regular
intervals.
7.0 List of spare parts for
BLUE MAX mini type 2/6

7.1 Spare parts

2101 Gear box housing
2102 Gear box cover
2103 Secondary spindle with chuck (5 pcs.)
2104 Main spindle with chuck (1 pcs.)
2105 Pinion z = 21 (4 pcs.)
2106 Pinion z = 32 (2 pcs.)
2107 Guide pillar
2108 Bearing plate
2109 Bridge
2110 Hexagon nut GB6170 M 12x1 zinc-plated
2111 Boring depth stop M 12x1
2112 Guide plate
2113 Work top 400 mm x 800 mm
2114 Fence 800 mm
2115 Foot profile 465 mm
2116 Guide screw M 6x12
2117 Shield
2118 Pan-head screw with slot and dog point
2119 Complete angle for fence
2120 Cap for chuck (76 497)
2121 Pull relief (type 2/6)
2122 Complete suction funnel (without fixing)
2124 Cover plate for suction (without fixing)
2127 T-slot screw
2128 Hexagon nut
2130 Thread-grooving screw GB818 - M 4x10 (3 pcs.)
2131 Flat washer 4
2151 Deep groove ball bearing 6000 -2RS
2152 Bushes
2154 Pressure spring (type 2/6)
2156 Complete pendulum stop (061 285)
2159 Cross recessed countersunk head screw M 5x8
2160 Hexagon socket cap head screw M 10x30 (2 pcs.)
2162 Pan-head screw GB70 - M 6x10
2163 Pan-head screw GB70 - M 8x10
2164 Rhombus nut M8
g d
24
2165 Headless pin GB80 M5x4
2167 Pan-head screw GB70 - M 6x12
2168 Pan-head screw GB70 - M 8x20
2172 Sealing Washer
2173 Headless pin SM15/64X28X5 and
SM15/64X28X7
2174 Pan-head screw GB70 - M 10x35
2175 Split washer GB958- A 10 St
2179 Straight pin GB119- A 4x16
2180 Flat washer 8
2181 Left cover
2182 Right cover
2183 O-shape rubber ring 3x1,5
2184 Hexagon socket set screw M 5x8
2185 Trapezoid block shaft (2 pcs.)
2186 Hexagon socket cap head screw M 8x16 (6 pcs.)
2187 Headless pin GB80 M 5x6 (2 pcs.)
2188 Angle iron (2 pcs.)
2189 Trapezoid block (2 pcs.)
2320 Rods for hand lever cranked
2321 Handle rod
2322 Pan-head screw GB70 - M 8x6
2353 Screw nail GB922 - 6x25
2530 Motor retainer
2551 Motor
2552 BoWex-clutch complete
2553 Feather key for clutch GB1096 - A3x16
2554 Pan-head screw GB70 - M 6x16
2555 Cross recessed pan head tapping screw ST 3,5x16
2556 Switch
2557 Rubber washer for switch
2558 Cross recessed pan head screw
2559 Relief
2560 Switch box
2561 Rubber washer for switch box