GRE EESB55 Manual De Instrucciones página 11

1. IMPORTANT
This machine should not be used by persons
(including children) with reduced physical,
sensory or mental abilities, nor by people who
have no experience or knowledge of it, unless
they benefited from supervision or prior
instructions concerning the use of the device,
by a person responsible for their safety (NF EN
60335-1/A1).
End-of-life of the machine
If you wish to replace or dispose of the machine,
do not discard it as household waste nor put it in
your local recycling containers.
On a new machine, this symbol
means that the equipment must not
be thrown out as trash and should be
specifically collected in order to be
re-used, recycled or valorized. If it
contains
potentially
environment,
eliminated or neutralized. You can give the
machine to a charitable or social organization
which can repair it and put it back in circulation
again. If you buy a new machine, you can leave
the old one at the point of purchase or request that
the delivery company take it back. This is known
as a "one for one" return.
If not, bring the machine to a drop-off recycling
center, if your locality has set up selective
collection of these products.
Give to a Return the
social used machine
organization to the
distributor
when making
a new
purchase
substances that are
dangerous for the
these must be
Leave the
used
machine at
the drop-off
recycling
center
101452 Installation and user manual
NF EN 60335-1/A1
and 60335-2-108
Note:
The "CE" conformity mark certifies conformity
with directive 89/336/CEE
electromagnetic compatibility, and directive
2006/95/CE relating to the safety requirements
of electrical equipment.
"This machine is conformed to directive
IEC/EN 60335-1 +A1: 2010"
This machine must be installed on an installation
conformed with directive CEI 60364-1.
- working temperature max <40 ° C
- working humidity
condensation
- the machine must be installed in a well-
ventilated place
Characteristics
Model Electrolyseur Sel 101347
230V – 50/60 Hz
This machine is made in FRANCE by
FLUIDRA INDUSTRY FRANCE.
After Sales Service:
FLUIDRA INDUSTRY FRANCE
661 Avenue Jean-Baptiste Biot
66000 PERPIGNAN
FRANCE
At minimum, the spare parts of this product will be
available throughout its commercial life, extended
of the warranty period.
relating to
max <80% without
11