Elinchrom Rotalux Manual De Instrucciones página 7

2. Mounting the Rotalux Softbox on the Elinchrom flash-unit:
A) Turn the locking ring of the flash unit (mounted on the tripod), anti clockwise
to unlock the bayonet. Remove the protective cap from the flash unit anti
clockwise.
B) Ensure that the locking knob on the Speedring is tightened (see 2.C). Insert
the Rotalux speedring and turn clockwise. It clicks into place.
Turn the locking ring clockwise to lock the bayonet with the Rotalux
Speedring attached.
C) The angle of the Rotalux softbox can be adjusted with the revolving system.
Unlock the locking knob of the Speedring and turn the softbox into the
desired position. Make sure that the Speedring is locked in the bayonet of
the flash unit whilst turning the softbox.
NOTE
: The Speedring and the locking knob may become hot when the Rotalux
is in use. Protect your hands with heat resistant gloves and switch off the unit and
disconnect it from the mains, when you need to adjust the softbox angle.
D) Attach the diffuser to the softbox.
E) Fix the diffuser with the Velcro tapes along the softbox sides and edges.
Download the user manual
Please get the user manual in other languages
at this link: http://bc.gs/41
User Manual
7