Multiplex Space Scooter Instrucciones De Montaje página 11

Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope
that you are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before you
start construction, as we cannot exchange components which you have already worked on. If you find any part is not
acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model Department.
Please be sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please
understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the
instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense. Building and
operating them safely requires a certain level of technical competence and manual skill, together with discipline and
a responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in serious
personal injury and damage to property. Since we, as manufacturers, have no control over the construction,
maintenance and operation of our products, we are obliged to take this opportunity to point out these hazards and to
emphasise your personal responsibility.
For the kit version the following additional items are required:
Receiving system
MULTIPLEX Pico 5/6 UNI receiver
alternatively:
or
MULTIPLEX Micro IPD UNI receiver
alternatively:
MULTIPLEX Nano-S UNI servo
MULTIPLEX Nano-S UNI servo
MULTIPLEX MULTIcont X-08 UNI speed controller
optionally: Nano-S UNI servo
Flight battery:
MULTIPLEX NiMH flight pack
Battery charger:
MULTIcharger 5008 DC
Adhesives: cyano-acrylate ("cyano") and activator; hot-melt glue
Use medium-viscosity cyano glue (not styrofoam cyano). It is important to use activator when using cyano. Epoxy
adhesives appear to produce a sound joint, but the bond is only superficial, and the hard resin breaks away from the
parts under load.
Tools:
Scissors, balsa knife, cross-point screwdriver, slot-head screwdriver, soldering iron.
The RTF (Ready To Fly) version includes all the radio control system components factory-fitted. Preparing the model
for flight takes just a few minutes. Charge battery, check the control surface travels, apply the decals - and you're away!
Specification:
Wingspan
Fuselage length
All-up weight
Wing area
Wing loading (FAI)
Motor / gearbox (3:1)
RC functions
Note: please remove the illustration pages from the centre of the instructions.
Important note
This model is not made of styrofoam™, and it is not possible to glue the material using white glue or epoxy. Please
be sure to use cyano-acrylate glue exclusively, preferably in conjunction with cyano activator (kicker). We
recommend medium-viscosity cyano for all glued joints. This is the procedure: spray cyano activator on one face of
the Elapor®; allow it to air-dry, then apply cyano adhesive to the other face. Join the parts and immediately position
them accurately.
Please take care when handling cyano-acrylate adhesives. These materials harden in seconds, so don't get them on
your fingers or other parts of the body. We strongly recommend the use of goggles to protect your eyes. Keep the
adhesive out of the reach of children.
GB
826 mm
792 mm
approx. 550 g
approx. 23 dm²
approx. 24 g/dm²
Permax 400 6V
Aileron, elevator and motor; optional rudder
# 21 4220 Space-Scooter kit including motor and gearbox
# 1 3204 Space-Scooter RTF 40 MHz Europe version
# 1 3205 Space-Scooter RTF 35 MHz Europe version
# 1 3206 Space-Scooter RTF 41 MHz Europe version
# 1 3207 Space-Scooter RTF 72 MHz US version
35 MHz A-band
40 MHz band
35 MHz A-band
40 MHz band
Aileron
Elevator
Throttle
Rudder
7/1500 mAh
Order No. 5 5920
Order No. 5 5921
Order No. 5 5971
Order No. 5 5972
Order No. 6 5120
Order No. 6 5120
Order No. 7 2270
Order No. 6 5120
Order No. 15 6030
Order No. 9 2525
11