Tabla de contenido
Publicidad
Intara CX
be installed out of arm's reach.
Cooling openings and cooling el-
ements must remain free of dust
and must not be covered. Do not
cover ballasts or put them on top
of one another. If a fire protec-
tion cover is used the ballast may
only be installed outside the fire
protection cover. The luminaire
is approved for fitting in nor-
mally flammable materials. The
safety clearance to flammable
materials must be adhered to.
The luminaire contains electro-
static sensitive components. Do
not touch the illuminating sur-
face. Mains transients or voltage
min. 250 mm
peaks can damage the luminaire.
The luminaire must be protected
against damage from grid-relat-
ed overvoltage. Damage caused
by overvoltage is excluded from
the terms of the guarantee.
The affixing of stickers or other
parts not authorized by BÄRO is
forbidden. Fire protection cov-
ers, replacement and additional
parts must be procured from or
approved by BÄRO. Luminaires
that do not work or flicker must
be disconnected from the pow-
er supply. Do not look directly
at the light source. In the event
of malfunctions please inform
BÄRO Service (contact infor-
mation on the last page).
Publicidad
Tabla de contenido
