Clatronic KA 3509 Instrucciones De Servicio página 30

Cafetera automática
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Instructions
Placement
Place the automatic coffee maker on a stable and level
surface. Place the appliance in such way that it cannot tip
over.
Do not place the appliance in close proximity to a gas or
electric stove or any other heat source.
Electric Connection
1. Ensure that your mains power corresponds with the specifi-
cations of the appliance. The specifications are printed on
the type label.
2. Connect the mains cable to a properly installed and earthed
wall outlet.
Button functions
ON/AUTO/OFF
Pressing once:
Turn on the device, the RUN indicator
lamp lights up, immediate brewing
process.
Pressing twice:
TIMER mode, the AUTO indicator
lamp lights up, the brewing process
will start at the programmed time.
Pressing 3 times: Turn off the device, both indicator
lamps are off.
PROG
Pressing once:
Setting of the current time
Pressing twice:
Adjustment of the start time; query of
the adjusted start time
HOUR Hour
MIN
Minute
Operation
Before making coffee for the first time operate the appliance
twice with clean water only and without paper filter. This re-
moves dust, which may have collected during transport. Follow
the instructions given under "Switching on the coffee machine
directly".
Operation
Set the time
The device works in the 24-hour mode. The time "12:00" is
preset.
Press the PROG button one time. "CLOCK" will appear above
the time in the display.
Set hours:
Press the HOUR button.
Set minutes:
Press the MIN button.
30
Leaving the
setting mode:
Wait ca. 15 seconds after the last push
of a button. The notification "CLOCK" in
the display will disappear.
Preparing the Coffee Machine
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount of cups of
coffee into the rear water tank. The water level is displayed
on the indicator.
NOTE:
You can use the pot to fill the water tank.
CAUTION:
Do not overfill the tank! Do not fill it above the 12 mark.
3. Ensure that the filter holder is properly attached.
4. Turn over the lower fold of the paper filter (size 1x4) and
place it in the filter funnel. Then fill it with coffee powder.
5. Now close the lid of the water tank.
6. Place the jug onto the warming plate.
CAUTION: Drip stop
Your appliance comes with a drip stop. It closes when
removing the coffee pot. This prevents the coffee from
dripping onto the warming plate if there is still water in the
filter.
Ensure that the lid is attached to the coffee pot. It
opens the drip stop.
If there is still water in the tank, place the pot under-
neath sa soon as possible. Otherwise the filter might
overflow.
Switching on the coffee machine directly:
Please follow the instructions under points "Preparing the Cof-
fee Machine".
7. Press the ON/AUTO/OFF button once. The RUN indicator
lamp lights up red. The appliance is operational.
NOTE:
The unit switches off automatically about 1 hour after
the brewing.
Once both indicator lamps are off, the device is
switched off.
If you yourself would like to shut off the device
beforehand, press the ON/AUTO/OFF button twice.
Automatic operation:
Please follow the instructions under points "Preparing the Cof-
fee Machine".
7. Press the PROG button twice. "TIMER" will appear above
the time in the display.
8. Set start time:
Set hours:
Press the HOUR button.
Set minutes:
Press the MIN button.

Publicidad

Tabla de contenido
loading

Tabla de contenido