Quick Start - ECOVACS ROBOTICS DEEBOT SLIM DA60 Manual De Instrucciones

3.2 Quick Start

1 Charging Dock Placement
Place the Charging Dock on a level floor
surface against the wall with the base
perpendicular to the ground. Keep the
immediate area 1.5m (5') in front of the charger
and 0.5m (1.6') on both sides of the charger
clear of objects and reflective surfaces.
Plug the Charging Dock in.
2 Install Side Brushes
Attach Side Brushes to the bottom of
DEEBOT SLIM by pressing a brush into each
slot with the matching color until it clicks.
3 Power ON
Turn the robot's Bottom Power Switch to
the ON position. " "=power ON; " "=power
OFF. DEEBOT SLIM is powered ON when
the AUTO Mode Button glows a continuous
BLUE.
* When DEEBOT SLIM is not cleaning, it
is suggested to keep it powered ON and
charging instead of powered OFF.
3. Operating and Programming
9
EN