Quick Start - ECOVACS ROBOTICS DEEBOT N78 Manual De Instrucciones

3. Operating and Programming

3.2 Quick Start

* Remove the Bumper Rail protection
sponges on both sides of the DEEBOT
before the first use.
1 Charging Dock Placement
Place the Charging Dock on a level floor
surface against the wall with the base
perpendicular to the ground. Keep the
immediate area 1.5m (5') in front of the charger
and 0.5m (1.6') on both sides of the charger
clear of objects and reflective object surfaces.
Plug the Charging Dock in.
2 Install Side Brushes
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each slot
with the matching color until it clicks.
8
EN