Whirlpool WDF518SAHW0 Instrucciones De Instalación página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

29.
Break tab off
Break tab off at score line for side mounting.
30.
Insert bracket into slot
Insert brackets into slot on either side of tub collar.
31.
Secure sidemount with screw
Secure brackets into slot with proviced screws.
32.
Slide completely into cut out
With top or side mount anchers attached, slide unit into cut
out until flush with cabinets.
33.
Level front to back side to side
Using a level, adjust legs If needed.
Use a level to check if the dishwasher is level front to back. If the
dishwasher is not level front to back, adjust the height of the rear
leg until the dishwasher is level. Open the door of the dishwasher
and check that both the tub and door clearances are correct. If
not, rotate the leveling legs on the bottom front of the dishwasher.
You can also check this by placing a level against an inside front
vertical surface of the tub.
34.
Leveling Leg adjustment
Turn leg counter clockwise to raise the dishwasher or clockwise
to lower the diswasher.
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido