Performing Basic Settings; Setting The Time And Date - Crane AU7-PF-23GA Manual Del Usuario

First use

Performing basic settings

After 90 seconds of button inactivity while
performing settings, the display will switch
back to the normal time indicator. All settings
performed until then will be saved. In this case,
start the setting process from the beginning.
− Hold the "MODE" button
until a signal beep sounds once.

Setting the time and date

The seconds will blink.
1. Set the seconds to zero with the "ST./STP." button
"SELECT" button
26
down for approx. 3 seconds
5
.
4
or
2