Changing The Battery - Crane AU7-PF-23GA Manual Del Usuario

Changing the battery

Changing the battery
To ensure that your pulse watch is water-tight, it is recom-
mended that you have the batteries changed by a watch
specialist or at our service point. If, however, you would like to
change the battery yourself, proceed as follows:
1. Use a screwdriver to remove the four screws
cover located on the back of the pulse watch.
8
2. Open the battery holder
clamping bracket over the locking hook
3. Insert a new CR2032-type 3 V battery
pole (+) facing up.
4. Hook the battery holder back in place.
5. Screw the cover back into place.
80
by carefully prying the
11
10
on the
7
.
9
with the positive