Crane AU7-PF-23GA Manual Del Usuario página 30

First use
Setting the tones
The "CHIME" indicator will appear.
1. To determine whether the pulse watch emits an alarm
every hour, select "ON" or "OFF" by pushing the "ST./STP."
button or "SELECT" button .
2 4
2. To confirm your selection, push the "MODE" button .
5
If you have selected "ON", the symbol will appear on the
bottom right of the display and the pulse watch will emit
one beep every full hour.
The "BEEP" indicator (button sounds) will appear.
3. To determine whether a beep signal will continue to
sound every time a button is pushed, select "ON" or "OFF"
by pushing the "ST./STP." button or "SELECT" button.
30