Gallagher SmartReader HR3 Manual Del Usuario página 10

Vibrator
The handle will vibrate upon Electronic ID recognition. This is a single vibration period
whether the tag is duplicate or unique.
The vibrator can be turned on and off, see the SmartReader HR
Bluetooth enabled
The SmartReader is Bluetooth enabled. This allows Electronic ID tag data to be
wirelessly transmitted to a paired Bluetooth enabled device (e.g. Scale or other data
logging devices). This is turned on or off depending on operating mode, which is
altered in the Configurator. See the SmartReader HR
Lamp
The lamp (red) illuminates for the following reasons:
•• When the SmartReader scans for
Electronic ID tags, the red lamp
flashes on and off.
•• On a successful tag read.
The lamp remains solid for an
extended period.
Note: If a tag is not read within the
read period the lamp stops flashing.
The timing of the lamp illumination can be altered, see the SmartReader HR
Configurator Help.
10
Configurator Help.
3
Configurator Help.
3
Lamp
3