Gallagher SmartReader HR3 Manual Del Usuario página 8

Bluetooth to
USB device
Tag Buffer
Electronic ID
tag number
Antenna
Activate the
SmartReader
Double-Click
Memory mode
Non-memory
mode
Read period
Scale
Scan for tags
Single-Click
8
Connected to the USB port of a computer and receives the tag
data sent by the SmartReader.
Receives the Bluetooth communications from the SmartReader and
passes the information onto a computer for deciphering.
(Note: This is not supplied, but is an optional extra.)
A temporary storage area in memory for tag data.
The Electronic ID tag number is the electronic code in an ear tag
that can be scanned to recognise an individual animal.
Contains the aerial used to capture Electronic ID tag data.
Turn on the SmartReader ready for use. The screen turns on and
allows you to select various user options.
Two quick successive clicks of the SmartReader trigger.
The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro
software.
The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging
device.
The time the SmartReader is actively scanning for Electronic ID
tags. Once the read period ends the SmartReader antenna is
turned off. Default time is three seconds. This time can be altered.
See the SmartReader HR
A digital weighing display unit that detaches from loadbars and
connects to your computer.
Turn on the SmartReader and single-click the trigger.
This activates the antenna and makes it ready to read Electronic ID
tag data once the tags move within the reader range.
A single click of the SmartReader trigger.
Configurator Help.
3