5. Test the connection between the Scale and the SmartReader, see Testing the
connection between Scale and SmartReader (p 23).
Pairing the RS232 Adaptor with your SmartReader
The process of pairing the RS232 Adaptor with the SmartReader is carried out by your
Gallagher distributor. If you are receiving the Bluetooth adaptor with your SmartReader,
the pairing will already be in effect. If you are having difficulties, take your SmartReader
and your adaptor to your nearest distributor for pairing.
Testing the connection between Scale and SmartReader
Once the connection between the SmartReader and Scale is established you need to
test the Scale is receiving the Electronic ID tag data from the SmartReader.
1. Activate the SmartReader.
2. Scan an Electronic ID tag.
3. Did the Electronic ID tag number display on the Scale?
• If yes, the connection is working.
• If no, the connection is not working.
Check the following:
• that the Bluetooth connection icon is visible on the SmartReader.
• the Bluetooth light is visible on the Bluetooth adapter.
• that the Scale is set up correctly, including the Scale communications port
(refer to the MyScale Pro Help).
23