Gallagher SmartReader HR3 Manual Del Usuario página 22

The Bluetooth icon displays on the SmartReader main screen if connection
is made between the SmartReader and the Bluetooth to RS232 adaptor, or
Bluetooth to USB adaptor.
3. Test the connection between the Scale and the SmartReader, see Testing
the connection between Scale and SmartReader (p 23).
Note: If you are connecting to a computer or other data logging device you need to
have software running (not supplied) to collect the Electronic ID tag data.
Data and power cable to Scale
1. Plug the Data and power cable into the cable connector on the SmartReader.
Cable connector
Data and
power cable
2. Plug the Data and power cable DB9 into the Scale.
On a Gallagher Scale connect to Port 2.
3. Turn on the Gallagher Scale.
4. Set up the Gallagher Scale to receive the Electronic ID tag data. See Setting up the
Scale (p 21).
Note: If you are connecting to a computer or other data logging device you need to
have software running (not supplied) to collect the Electronic ID tag data.
22
DB9 connector