Cleaning And Maintenance; Technical Data - Ciatronic ES 2999 Instrucciones De Servicio

Máquina para hacer espresso
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Follow carefully the safety instructions before cleaning the machine.
Remove the plug and let the machine cool.
Use a citric acid-based decalcifying agent for decalcifying.
Important Note! After descaling the device boil fresh water in it several times
(approximately 3-4 times) in order to remove any residues. Do not consume
this water.
Wipe the machine with a clean humid towel.
Do not use detergents.
Wash the fi lter shell, the fi lter holder, the glass pot, the pot lid, the boiler cap
and the drip collection grid in a sink as usual.
Do not wash any of the parts in the dishwasher.
In order to clean the vapor jet let the vapor out for approximately three seconds
after removing it from the milk. Turn the control knob to the Off position and
wipe the vapor jet with a clean humid towel.
Attention: the metal vapor jet is hot!
Seals
Warning!
Danger:
GB
Model: .........................................................................................................ES 2999
Power supply: ....................................................................................... 230 V, 50 Hz
Power consumption: ....................................................................................... 800 W
Protection class: ...................................................................................................... Ι
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
56
05-ES 2999 Skala 56

Cleaning and Maintenance

Check the seals in the aperture of the boiler and on the fi lter
holder regularly. If the fi lter holder can be moved too easily in
the brewing head, the seal in the brewing head is worn.
The fi lter holder can become loose when under pressure. Do
not operate the machine until you have replaced the seal in the
brewing head.

Technical Data

09.12.2005, 8:49:39 Uhr

Publicidad

Tabla de contenido
loading

Tabla de contenido