Use Of Accessories; Use - Imetec L1103 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
GB
The hair dryer is provided with the accessories described
above.
The accessory is mounted on the appliance by pressing it on
to the front part of the hair dryer (4) until it is inserted. When
finished using it, the accessory can be removed by pulling it
firmly.
Nozzle for styling (6)
Use the styling nozzle to direct the air jet as you wish.
Refer to figure in the illustrative guide of the instructions for

use.

Appliance with separate keys for air flow (3A) and
temperature (3B)
The two keys set air flow and temperature separately at the
following levels:
Air flow button (3A)
0 = OFF
1 = medium air flow
2 = strong air flow
Cold air shot button (3C)
If the appliance has this button, use it to set the straightened
hair.
001075_L1103.indd 12

USE OF ACCESSORIES

If this button is pressed while the appliance is on, the hot
air cools and the straightened hair setting lasts longer.
Once the button is released, the appliance returns to a
hot air flow at the selected level.
USE
Temperature button (3B)
1 = low temperature
2 = medium temperature
3 = high temperature
12
28/01/13 23.2

Publicidad

Tabla de contenido
loading

Tabla de contenido