Storage; Maintenance; Cleaning - Imetec L1103 Instrucciones De Uso

When the hair dryer is not used, unplug the appliance from the
socket and store it in a dry and dust-free place.
Do not wind the power cord around the appliance. Coil it
up loosely with no tight bends.
Cleaning the appliance and accessories
Clean the appliance and the accessories (diffuser, nozzle)
with a moist cloth when needed. Do not use solvents or other
aggressive or abrasive detergents. This can damage the
surface.
Check the intake opening of the appliance regularly and
remove all hair and dust.
Cleaning the intake filter (5A)
If the appliance is provided with an intake filter, clean it as
follows:
• open the filter cap (5B), as shown in
• remove the mesh (5A), if included and use a damp cloth to
clean it together with the filter cap (5B);
• let the parts dry well and put them back on in inverse order.
Note: the more dust is present in the place where the hair
dryer is used, the more often the filter must be cleaned.
001075_L1103.indd 13

SToRAGE

MAINTENANCE

ATTENTION! Turn the appliance off and unplug
it from the socket before cleaning!
Before re-using the appliance, ensure that all
parts that have been cleaned with a damp cloth
are completely dry!

CLEANING

13
GB
28/01/13 23.2