Introduction; Safety - Midtronics MicroXL Serie Manual De Instrucciones

GB

INTRODUCTION

The Micro400XL Advanced Battery Conductance Analyzer and the
Micro500XL Advanced Battery Conductance & Electrical System Analyzer
provide a complete analysis for 6- and 12-volt automotive, commercial,
and marine batteries. The MicroXL Series analyzers digitally display
voltage, battery condition and available power, and provide a test code
(available in BMP version) for warranty management. With a menu of
options, the analyzers can function also as voltmeters and as quality
control devices capable of testing up to 200 batteries in succession.
The Micro500XL integrates the in-vehicle battery test with a starting
system test. It also provides a charging system analysis by taking
multiple measurements while the charging system is exercised and at
idle to determine if it is capable of charging the battery while supplying the
necessary power for the electrical system.
Both analyzers enable wireless printing to an optional portable printer
through a built-in IR communication port.

SAFETY

Inspect the battery for damages and check the electrolyte level.
If the electrolyte level is too low, replenish it and fully charge the battery.
Always use the necessary safety precautions when working with
batteries:
•
Carefully read all operating and safety instructions before using the
MicroXL Series analyzer.
•
Wear eye protection and use caution when working around batteries.
•
Do not smoke, strike a match, or cause a spark in the vicinity of
the battery.
•
Keep hair, hands, and clothing as well as analyzer cords and cables
away from moving engine parts.
E
NGLISH
3
• •