Display And Keypad - Midtronics MicroXL Serie Manual De Instrucciones

GB

DISPLAY AND KEYPAD

When you first connect the MicroXL Series analyzer to the battery, it will
function as a voltmeter until you press the ENTER button.
The menu-driven display will then guide you step by step through the test
process. Use the keypad buttons to scroll and select menu options.
NOTE: To conserve the internal 9-volt battery, the display will
turn off (Sleep mode) after 30 continuous seconds of voltage
loss at the clamps.
The voltmeter display is visible
when you first connect the analyzer
to the battery.
Use the UP/DOWN ARROW buttons to
scroll to menu choices.
Use the ENTER button to make selections.
The INFO (CODE) button is active when the
test results are displayed. Press the INFO
button to calculate battery charging time
and to retrieve a test code (available in BMP
version).
Press and hold the MENU button to display
the following options. Use the ARROW
buttons to scroll up or down through the list
(3 options displayed per screen) and press
ENTER to select:
1) Print Results (option)
2) View Results
3) QC Mode
4) Voltmeter
5) Export Data (option)
6) Perform Test
7) Utilities
E
NGLISH
0 – 30 VDC MAXIMUM
6.19V
PRESS ↵ ↵ ↵ ↵ ↵ TO CONTINUE
4
• •