Multimetrix DM 100 Manual De Instrucciones página 26

English
Indirect
measurements –
Determine a
distance using 3
measurements
Storage
26
Press twice; the display unit shows the following
symbol:
The distance to be measured flashes on the symbol.
Aim at the low point (1) and validate the
measurement. Once this first measurement has
been acquired, place the device horizontally.
Press to take the distance to the horizontal
point (2). Then aim at the high point.
Press to take the distance to the high
point (3).
The result of the calculation is indicated on the third line of
the display unit.
The last 20 records (measurements or
calculations) are stored, in reverse order. Use
the
records.
It is possible to erase all of the records by pressing the
Record and Erase keys simultaneously.
3
2
1
keys to display these
Laser Distance Meter DM 100