Craftsman 315.BT2010 Manual Del Operador página 27

TO ADJUST THE MITER LOCK LEVER
See Figure 33.
Prior to squaring the saw blade to the fence, check and
adjust the miter lock lever, if needed. In the "locked" posi-
tion, the action of fully locking the miter lock lever should
feel tight and secure. Considerable effort should be
required to move the miter table. If the table moves easily
when in the "locked" position, an adjustment of the miter
lock lever is required.
To adjust:
 Unplug the saw.
 Lock the miter lock lever completely.
 Pull the miter lock lever out to the right to disengage,
then rotate forward to adjust.
 Release miter lock lever to re-engage
 Recheck the miter table to ensure proper tightness.
ADJUSTMENTS
27 — English
UNLOCK
LOCK
MITER
LOCK
LEVER
Fig. 33