Safety Warnings; Used Symbols - TENTECH MD1035x Manual De Uso

Before to use this instrument the User guide and Safety warnings must be read
•
and understood.
Safety procedures and rules for working near high voltage energized systems
•
must be observed during the use of this equipment. The generated voltages may
be dangerous.
Do not connect or disconnect the test leads during the measurement.
•
Do not touch the test leads before the high voltage indicator turn-off.
•
Be careful not to make short-circuit between the high voltage terminals and the
•
"R" or "Guard" terminals while a measurement is running, because it could be
dangerous for the operator.
Be sure that there are not any voltage difference between the points to which the
•
equipment will be connected to, neither between them and ground.
The panel, terminals and connectors of the equipment must stay dry and clean.
•
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.

Used symbols

Caution, risk of electric shock.
Caution, refer to User Guide.
Battery
Printer
Voltmeter
Equipment complies with current EU Directives.
The rubbish bin with a line through it means that in the European Union,
the product must undergo selective disposal for the recycling of electric
and electronic material, in compliance with Directive WEEE 2002/96/EC.

Safety warnings

4