TRAnSPORTATIOn
The PowrDriver may not be hooked up to the trailer
hitch on a motor vehicle for transportation. PowrDriver
may solely be transported on a flat-bed trailer or other
transportation vehicle (i.e. a pickup truck) after it has
been securely fastened.
Danger of crushing! Several persons are needed to on
or off load PowrDriver.
PowrDriver may not be transported with a crane.
MOVInG VEHICLE HAZARD
Careless and reckless behavior causes accidents. Falling
from vehicle, running into people or object, or being
struck by other vehicles may result in serious injury or
death.
PREVEnTIOn:
• When climbing on PowrDriver, do not step on forward/
reverse pedal.
• Make turns slowly and limit turns to 45° and under.
• Do not operate on slopes greater than 15°.
• Be careful when traveling on extreme declines and road
pitches to prevent traction loss.
• Do not carry passengers.
• Do not tow without tow package and limit payload.
• Follow all local highway and transportation regulations.
• Do not operate the equipment when it is dark.
• Only operate the equipment on clean and solid surfaces.
• The equipment may only be used by a fully trained
operator.
BURn HAZARD
To avoid severe burns, avoid hot equipment or fluid.
Wait until equipment/fluid has cooled completely.
Do not place any flammable materials (e.g. oil soaked
rags) on the motor.
CARBOn MOnOXIDE HAZARD
Breathing carbon monoxide can cause death. Do not
operate in an enclosed area.
PowrDriver
GB
PERSOnAL PROTECTIVE EQUIPMEnT
Wear appropriate protective equipment when
operating or servicing equipment to help protect you
from serious injury:
• Protective eye wear
• Clothing and respirator recommended by manufacturer
• Steel toe shoes
• Gloves
• Hearing protection
FIRE AnD EXPLOSIOn HAZARD
Flammable fumes, such as solvent and paint fumes, in
work area can ignite or explode.
PREVEnTIOn:
• Use equipment in well ventilated area.
• Do not fill fuel tank while engine is running or hot.
• Eliminate all ignition sources when flammable fumes are
present.
• Keep work area free of debris
• If there is static sparking or you feel a shock, stop
operation immediately.
• Keep a fire extinguisher in work area.
STORAGE
Do not leave the PowrDriver in open air without
protection, it must be stored in a dry place.
9