Setting The Time; Using The Blinds - Dometic FRESHLIGHT FL1600 Instrucciones De Uso

FreshLight
9.14

Setting the time

The remote control needs the current time in order to program the timer. The time is
indicated on the display of the remote control.
Perform the following steps to set the time:
I
NOTE
The remote control returns to its initial mode if no key is pressed on the
remote control for ten seconds while setting the time.
➤ Press and hold the
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
Press the + or – button longer than 2 s to increase or decrease the time quicker
➤ Press the SET button to confirm the time.
9.15

Using the blinds

A
NOTICE! Beware of damage
The blackout blind may not be closed completely if the vehicle is
standing in the blazing sun. There is a danger of heat accumulation. In
order to prevent damage, the blackout bind must remain open by at
least one third.
The two blinds can be used to control the sun and light penetrating the vehicle.
➤ Move the blinds manually (fig. 6, page 6).
EN
button for 2 s.
Operating the roof air conditioner
31