Cleaning The Silicone Parts - Omega MMV700 MegaMouth Serie Manual Del Usuario

CLEANING THE SILICONE PARTS

TIP: • Clean the rotation wiper under running water. Thoroughly dry after cleaning.
Before assembling the top-set, ensure that the compression silicone and
silicone ring are firmly inserted.
NOTE: • If the compression silicone and silicone ring are not firmly inserted, juice may
leak from the bottom of the juicing bowl.
Silicone Brush
Pull out the silicone brush from the rotation wiper to clean. After cleaning, insert into the
slot with the tail pointing down as shown in the illustration.
Silicone Ring
Remove the silicone ring from juice screen to clean. After cleaning, push in the silicone
ring as shown in the picture. Carefully place the silicone ring by aligning grooves and
wedges.
Juice Tap
Remove from the juice spout to clean. After cleaning, attach the Juice Tap to the Juice
Tap silicone on the juice spout.
17