Useful Tips; Tank Strainer - Makita BVF104 Manual De Instrucciones

tank) from getting into the pump. If the water absorption
strainer becomes blocked, spraying will deteriorate,
and there is a risk of the pump being adversely
affected.
Lever cock strainer
• Spraying deteriorates if the lever cock strainer
becomes blocked.
Sprayer storage
• Wash the equipment using the after-use maintenance
procedures.
• In particular, when storing during the winter season,
breakdown or damage may occur due to freezing of
residual chemical and/or washing water in the pump.
Run the pump until all residual liquid has exited from
the nozzle, check to make sure there is no more
residual liquid, turn the sprayer switch OFF, and then
store the sprayer away.
CAUTION:
Store the Sprayer out of reach of children, in an indoor
locale that does not freeze, is away from direct sunlight,
and has good ventilation.
- Take full care in storing the sprayer, as, in some cases,
the plastic components will deteriorate markedly if left
in direct sunlight for a prolonged period; moreover,
product caution labels will discolor and/or come off.

Useful Tips

Spray pipe holder
Be sure to attach the holder in the right direction. (Fig. 10)
Malfunction status
Motor (pump) will not work
Pump is working but spray is not coming out
10
Switch OFF
Switch ON
NOTE:
• For configuration reasons, force is required in the
attaching process, but care should be taken not to
bend the spray pipe.
Use the holder when taking a rest, replenishing chemical
liquid, and at times of storage, etc. (Fig. 11)
For Model BVF154 only (Fig. 12)
Chemical tank holder post (Fig. 13)
The holder post also serves as a temporary holder for the
chemical tank lid, so please hook it onto this post.
(Fig. 14)

Tank strainer

Hands can be freed up by inserting the water hose in the
useful notched section of the tank strainer. (Fig. 14)
Main plant diseases and pests
Always adhere to chemical manufacturer instructions
when handling chemicals.Thoroughly dissolve chemical
prior to use.
What to do if you think there is a
breakdown
Before asking for repairs, first, conduct your own
inspection. If you find a problem that is not explained in
the manual, do not rashly dismantle the sprayer. Instead,
ask Makita Authorized Service Centers, always using
Makita replacement parts.
Cause
The switch is OFF
Battery problem (under
voltage)
Wiring connector is
disconnected
Wiring break
Switch breakdown
Motor breakdown
Blown fuse
Blocked nozzle
No liquid in chemical tank
Chemical tank lid's blowhole is
blocked
Blocked piping
Broken or cracked piping
Disconnected or broken piping Request an overhaul
Blocked water absorption
strainer
Action
Turn switch ON
Recharge
If recharging is not effective,
replace battery.
Request an overhaul
Request an overhaul
Request an overhaul
Request an overhaul
Request an overhaul
Clean or replace
Replenish
Clean
Request an overhaul
Request an overhaul
Remove and clean