Graf KLsepa.compact serie Instrucciones De Montaje página 25

2.3. Building site
The tank must only be installed in non-cohesive soil to slightly cohesive soil (G1 group,
condition A4 and B4, degree of compaction DPR = 97 %, according to ATV-DVWK-A
127). In case of deviating installation conditions, a separate verification must be carried
out.
Vor der Installation müssen folgende Punkte unbedingt abgeklärt werden:

The structural suitability of the ground.

Maximum occurring ground water levels and infiltration capacity of the ground.
To determine the soil physical factors, a ground assessment must be carried out.
2.3.1. Ground level cover
Attention: The ground level cover over the tank collar must be between 700 and 1200 mm!
Saphir tank series
700 - 1200
2. Installation conditions
KLsepa.compact
Diamant tank series
700 - 1200
23