Graf KLsepa.compact serie Instrucciones De Montaje página 27

2.3.4. Bank
The separator must be installed in a way so that the upper edge of the covers is aligned
adequately high with the standard level of the area to be drained. The required banks can be
taken from the table mentioned below.
Typ
KLsepa.compact [cm]
NS3-300
NS3-400T,
NS3-600,
NS6-600
NS6-1300,
NS10-1300
NS10-2000,
NS15-2000
2.3.5. Accessible cover (A15 in accordance with EN124)
If there is no car traffic over the tank area and no load distribution plate is installed, the
clearance to the passable areas must correspond with the building pit depth.
Saphir tank series
> H
2. Installation conditions
Bank
16
19
15
12
15
H
KLsepa.compact
Diamant tank series
> H
H
25