Start-Up; Prerequisites For Starting Up; Running The Installation Assistants; Changing The Settings Later - Vaillant sensoHOME VRT 380 Manual De Uso

4

-- Start-up

4 -- Start-up

4.1 Prerequisites for starting up

– The system control and, if required, the
outdoor temperature sensor have been
electrically installed and wired.
– Start-up of all system components (ex-
cept for the system control) is complete.
4.2 Running the installation
assistants
The installation assistant is at the Lan-
guage: query.
The system control's installation assistant
takes you through a list of functions. For
each function, you should choose the set
value that is best suited to the heating
installation being installed.
4.2.1 Completing the installation
assistant
Once you have gone through the installa-
tion assistant, Select the next step. ap-
pears on the display
Installation configuration: The installa-
tion assistant switches to the system con-
figuration for the installer level, in which
you can further optimise the heating in-
stallation.
Installation start: The installation assist-
ant switches to the basic display and the
heating installation works with the values
you have set.

4.3 Changing the settings later

All settings that you have made via the in-
stallation assistant can be changed again
at a later date via the end user or installer
level.
16
5 Fault and maintenance

5.1 Fault message

appears in the display.
You can find fault messages under: MENU
→ SETTINGS → Installer level → Fault
history
Troubleshooting (→ Appendix)

5.2 Maintenance message

sage appears in the display.
Maintenance message (→ Appendix)

6 Information about the

6.1 Observing and storing other
▶
▶

6.2 Validity of the instructions

These instructions apply only to:
– 0020260951

6.3 Data plate

The data plate is located on the rear of the

product.

Operating and installation instructions sensoHOME 0020288192_00
messages
with the text of the fault message
with the text of the maintenance mes-
product
applicable documents
Observe all of the instructions that are
intended for you and are enclosed with
the components of the installation.
As the end user, keep these instructions
and all other applicable documents safe
for future use.
Information on the
data plate
Serial number
Meaning
for identification;
7th to 16th digits
= product article
number