Radio Operation - Trevi CMP 582 DAB Manual De Uso

ENGLISH
2. Press /
PLAY/PAUSE/SELECT/SCAN button to enter.
3. Use the
PLAY/PAUSE/SELECT/SCAN button to enter.
Note:
"System" in the MENU is used to reset the unit and check the software version.
"Prune" in the MENU is used to clear all the DAB stations memory.

RADIO OPERATION

Listen to FM radio broadcasts. Press the STANDBY/FUNC. button until the display reads FM
and the radio frequency
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by rotate the TUNING knob. The station frequency is shown on the display.
AUTO PRESET MEMORY / SCAN
them to preset memory automatically, press and hold the PLAY/PAUSE/SELECT/SCAN button.
After the unit is finished scanning, the unit will automatically tune to preset number 1 (P1).
Use the /
Press the MEM./P-MODE button. Then use the
memory location. Then press PLAY/PAUSE/SELECT/SCAN button to enter.
USING THE CD/MP3
Discs for Playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio
CD-Recordable (CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.
LOADING A DISC
Select the CD mode with
1.
display "CD mode".
2. Open the CD door. "
3. Place an audio CD/MP3 into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after several
seconds and will playback.
5. Press the PLAY/PAUSE/SELECT/SCAN button to pause, the display flashing.
6. To release the pause, press again the PLAY/PAUSE/SELECT/SCAN button.
7. Press STOP/MENU button to stop playback completely.
Note:
 To ensure good system performance; wait until the disc tray completely reads the disc
before proceeding.
 The number of folders and the number of tracks will be shown with CDs in the MP3 format.
 If no disc is loaded into the compartment, or the disc is placed upside down, the display will
10
buttons to select unit "Manual tune" shown on the display. Then press
/ buttons to select the desired memory location. Then press
To scan for stations within reception range and save
buttons to select the desired memory location.
STANDBY/FUNC. Button.
OPEN
" will be shown on the display.
2. Press / buttons to select unit "Manual tune" show
PLAY/PAUSE/SELECT/SCAN button to enter.
3. Use the /
PLAY/PAUSE/SELECT/SCAN button to enter.
Note:
"System" in the MENU is used to reset the unit and check the so
"Prune" in the MENU is used to clear all the DAB stations memo
RADIO OPERATION
Listen to FM radio broadcasts. Press the STANDBY/FUNC. bu
and the radio frequency
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directl
• Tune to a station by rotate the TUNING knob. The station frequ
AUTO PRESET MEMORY / SCAN
them to preset memory automatically, press and hold the PLAY
After the unit is finished scanning, the unit will automatically tune
Use the / buttons to select the desired memory
buttons to select the desired
USING THE CD/MP3
Discs for Playback
This system can playback all digital audio CD/MP3/WMA
CD-Recordable (CD-R) discs and finalized digital audio CD-Rew
LOADING A DISC
Select the CD mode with The following will appear in the
1.
display "CD mode".
2. Open the CD door. "
3. Place an audio CD/MP3 into the tray with the label side facin
4. Close the CD door. The total number of tracks will appea
seconds and will playback.
5. Press the PLAY/PAUSE/SELECT/SCAN button to pause, the d
6. To release the pause, press again the PLAY/PAUSE/SELECT/SC
7. Press STOP/MENU button to stop playback completely.
Note:
 To ensure good system performance; wait until the disc
before proceeding.
 The number of folders and the number of tracks will be show
 If no disc is loaded into the compartment, or the disc is place
4
CMP 582DAB
buttons to select the desired m
To scan for stations wi
STANDBY/FUNC. Button.
OPEN
" will be shown on the display.
The
4