Installation; General Information; Installing The Stereo Microscope - Zeiss Stemi 305 Instrucciones De Manejo

Stereo microscope
Stemi 305
3

INSTALLATION

3.1

General information

Before installing and commissioning the device, make sure to read the Notes on instrument
safety carefully (see section 1.2, Page 4).
The Stemi 305 with the necessary tools and optional equipment is delivered in several standard packages.
•
Take all units out of the packaging and check them for completeness according to the delivery note.
For installation and/or transport of the microscope or the stand, exclusively use the handle
(Fig. 3/5) provided to this effect.
•
Remove transport securing devices (adhesive tapes etc.).
•
Keep original packaging for a possibly extended period of storage or return of the device to the
manufacturer or dispose of it appropriately.
3.2

Installing the stereo microscope

•
Place stand on a level, firm support.
•
If the Stemi 305 body (Fig. 10/2) has not yet
been mounted, insert it in the Stemi mount
(Fig. 10/4), align it and secure it using the
clamping screw (Fig. 10/6).
The appropriate Allen key (Fig. 10/9) is located
in the support on the back of the device.
•
If the two eyepieces (Fig. 10/1) have not yet
been mounted, insert them both to their stop in
the eyepiece tube.
•
Remove the two protective caps from the
eyepieces (Fig. 9/1) and remove the protective
cap (Fig. 9/2) from the objective by turning.
04/2015
INSTALLATION
General information
Fig. 9 Removing caps
435063-7044-010
ZEISS
17