Pot Detection; High-Power Level - bora PIW 1 Instrucciones De Montaje Y De Uso

Operation
Switching off the cooking zone
► Turn the knob to position 0.
─ The operating indicator is off.
─ As long as the cooking zone is still hot, an H
appears in the display, showing there is still
residual heat. After sufficient cooling-down
this display disappears as well.

Pot detection

The cooking zone is equipped with a pot detection
function. The cooking zone can only be turned on if
suitable magnetisable pots and pans are deposited
on the cooking zone.
■ If the pot or pan is removed from the cooking
zone during operation, the energy transfer is
interrupted and the display indicates v.
■ If an unsuitable or too small pot is placed on the
cooking zone, v is indicated on the display.
After the elapsing of 10 minutes without a pot
being detected, the cooking zone switches off
automatically and can only be switched back on
again after the appliance has been switched off
and on again with the Ɣ button.
Make sure that the wok has the same calotte
radius as the glass ceramic cooking zone
which is 210 mm.
34

High-power level

The cooking zone is equipped with the power-
increasing high power level P. If you switch onto
the high-power level the cooking zone operates
with an extra-high performance of 3000 Watt for a
duration of 10 minutes. After 10 minutes, the
appliance switches automatically back to power
level 9.
Switching on
► Push in the toggle of the knob of the heating
zone and turn the knob via power level 9 to P.
─ The P symbol is displayed.
─ After 10 minutes, the cooking zone is
automatically
9.
level
If the pot is removed from the cooking zone,
high power
interrupted. High power operation resumes
when the pot is again placed on the cooking
zone.
Manually switching off high power operation
To manually switch off high power operation,
proceed as follows:
► Turn the toggle of the cooking zone knob
across power level 9
─
9 is activated.
Power level
Alternatively:
► Turn the toggle of the cooking zone knob to the
desired power level.
─ The selected
power level
If the control system or the cooking zone is
overheating, high
automatically switched off.
switched back to
operation is automatically
to P.
is activated.
power operation
g
power
is