RIB KS2 24V Manual Del Usuario página 25

Cuadro electronico de mando para uno o dos motores
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency of
the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 91
SPARK ANTENNA 433
F
IT SYNCRO
FIT SYNCRO PHOTOCELLS for the wall-installation
The range you can set Is 10÷20 m 49÷100"
You can fit many couples close together thanks to the synchronising
circuit.
Add the SYNCRO TRANSMITTER,
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
COUPLE OF COLUMNS FOR FIT SYNCRO PHOTOCELLS
H=0,5m
P
HOTOCELLS WITH BATTERIES
empty batteries warning - range 25 m - 2 years batteries life
PAIR OF BATTERIES 2 x 3,6V - 2,7Ah
B
LOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILD-IN
T
OUCH EN12978
code ACG7059
code ACG7042
code ACG5454
code ACG5452
MECHANICAL STRIP L = 2 m
CERTIFIED EN 12978 (2003-05) - CATEGORY EN 954-1 2/3
code ACG8026
code ACG8028
code ACG8051
code ACG8057
code ACG8038
code ACG9517
G G
B B
code ACG1053
code ACG1048
code ACG3015

Publicidad

Tabla de contenido
loading

Tabla de contenido