Sony WRR-861A Manual De Instrucciones página 11

Note
The indication may be incorrect if the batteries are not new
when installed. If you plan to use the tuner for a long
period, it is best to replace the batteries with new ones.
1 2
BATT Lights Lights
indication
Good
Less than
BATT
50% charge
condition
Notes on batteries
•
Use new alkaline batteries.
•
Do not use different types of batteries together.
•
Always replace the four batteries together.
•
Be careful to install the batteries with the correct polarity.
•
The batteries are not rechargeable.
•
When not using the tuner for a long period, remove the
batteries to avoid leakage. If the batteries do leak, clean all
leakage from the battery holder case and the unit. Leakage
left in the holder case and the unit may cause poor battery
contact. If there seems to be poor battery contact, consult
your Sony dealer.
3 4
Lights Flashes
Less than Almost
20% charge exhausted
External power operation
To operate on an external power supply (DC 10 V to 17 V),
connect the DC 12V IN connector to the DC OUT
connector of a camcorder using the power cable supplied.
When the external power is supplied, the tuner functions
regardless of the built-in batteries.
7
(US)