Miscellaneous Settings - Makita DMR114 Manual De Instrucciones

Presetting stations in AM/FM mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button to switch on your radio.
2. Press the Source button to select the desired
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to 5) until
the display shows "P4" for example after the frequency.
The station will be stored using the preset number.
Repeat this procedure for the remaining presets as you
wish.
4. Preset stations which have already been stored may be
overwritten by following the above procedure if required.
Display modes – FM
Your radio has a range of display options for FM radio mode.
Repeatedly press the Menu/Info button to view the RDS
information of the station you are listening to.
a. Station name Displays the name of the station being
listened to.
b. Program type Displays the type of station being
listened to such as Pop, Classic,
News, etc.
c. Radio text Displays radio text message such as
new items etc.
d. Year/Day Displays the year and day of the week
according to the date setting of your
radio.
e. Date/Day Displays the date and day of the week
according to the date setting of your
radio.
f. EQ mode Displays the EQ mode of the FM for
the station listened to.
g. Frequency Displays the frequency of the FM for
the station listened to.
FM stereo (auto)/mono
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Source button as needed to select the FM
band and tune to the desired FM station as previously
stated.
2. Press and hold Menu/Info button to enter the menu
setting.
3. Rotate the Tuning control knob until the "FM AUTO (or
MONO)" setting shows on the display. If the setting is
Auto, press the Tuning control knob and then rotate the
Tuning control knob to switch to Mono mode to reduce
the hiss. Press the Tuning control knob to select the
option.
Recalling a preset in AM/FM mode
1. Press the Power button to switch on your radio.
2. Press the Source button to select AM or FM radio
mode
3. Momentarily press the required Preset button to tune
to your radio to one of the stations stored in the preset
memory.

MISCELLANEOUS SETTINGS

Setting the time and date format
The clock display used in stand-by mode and on the
playing mode screens can be set to different format. The
selected format is then also used when setting the alarms.
1. Press and hold the Menu/Info button to enter the menu
setting.
2. Rotate the Tuning control knob until "CLOCK xxH"
appears on the display and press the Tuning control
knob to enter the setting. You will see the time format
begins to flash.
3. Rotate the Tuning control knob to select either 12 or 24
hour format. Press the Tuning control knob to confirm
your choice of clock format.
Note:
If the 12 hour clock format is chosen, the radio will
then use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button to enter the menu
setting.
5. Rotate the Tuning control knob until a date (e.g. THU
APR 3) appears on the display and press the Tuning
control knob to enter the setting. You will see the date
format begins to flash.
6. Rotate the Tuning control knob to select the desired
date format. Press the Tuning control knob to confirm
your choice.
Setting the clock time and date
1. Press and hold the Menu/Info button.
2. Rotate the Tuning control knob until "CLOCK ADJ"
appears on the display. Press the Tuning control knob
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to select the desired
hour, and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
the desired minute, and press the Tuning control knob
to confirm the setting.
4. Rotate the Tuning control knob until "DATE ADJ"
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob to select the desired
year and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
9 ENGLISH