Presetting Stations Manually; Tuning In To A Preset Station; Cd Player Operation - Aiwa CDC-X227 YZ Manual De Instrucciones

Presetting stations manually

(Manual Memory)
1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, MW, or LW).
2
Press i or k to tune in to a desired station (see
"Tuning in to a station" as well for another tuning
method).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.

Tuning in to a preset station

1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, MW, or LW).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
SRC
r/t
1
Insert a CD.
"CD" appears on the display.
CD play starts.
If a CD is already inserted, press SRC repeatedly to
select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
5
ENGLISH
CD indicator Elapsed playing time
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
Note
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data or incompatible data
is inserted, "E03" will appear on the display. The unit
z
cannot play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
INT RNDM "SCAN" appears on the display.
REP 1
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
Labeled-side up
Track number
Press
z
t
r
Press and hold r or
t until you find the
point.