After-Sales Service And Application Service - Bosch Atino Manual Original

English | 25
Leave the gel pad, holder and protective cap to dry completely. The gel pad must not be
warmed up (e.g. through warm air or heating).
Place the protective cap (15) on the gel pad (14) and turn it clockwise to lock it in place.
Place the gel pad holder (13) on the measuring tool and turn it clockwise to secure it.
If the adhesive strength is still not sufficient even after the gel pad (14) has been
cleaned, it should be replaced.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product
in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Measuring tools, accessories and packaging should be recycled in an environmentally
friendly manner.
Do not dispose of measuring tools or batteries with household waste.
Bosch Power Tools 1 609 92A 5YH | (09.07.2020)