Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch PLR 25 Manual Original

All manuals and user guides at all-guides.com
OBJ_BUCH-939-003.book Page 22 Tuesday, June 10, 2014 3:11 PM
22 | English
The measuring tool monitors the correct function for each
measurement. When a defect is determined, only the symbol
shown aside flashes in the display. In this case, or when the
above mentioned corrective measures cannot correct an er-
ror, have the measuring tool checked by an after-sales service
agent for Bosch power tools.
Accuracy Check of the Measuring Tool
The accuracy of the measuring tool can be checked as follows:
– Select a permanently unchangeable measuring section with a length of ap-
prox. 3 to 10 metres; its length must be precisely known (e.g. the width of a
room or a door opening). The measuring distance must be indoors; the target
surface for the measurement must be smooth and reflect well.
– Measure the distance 10 times after another.
The deviation of the individual measurements from the mean value must not ex-
ceed ±3 mm (max.). Log the measurements, so that you can compare their ac-
curacy at a later point of time.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or
solvents.
Maintain the reception lens 17 in particular, with the same care as required for
eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an authorised after-sales
service centre for Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always include the 10-dig-
it article number given on the type plate of the measuring tool.
In case of repairs, send in the measuring tool packed in its protective pouch 21.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and informa-
tion on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our
products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a
product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
1 609 92A 0JZ | (10.6.14) Bosch Power Tools