Operation; Controls († Ig. 1); Display; Overview Of Adjustable Parameters - SKF TKRS 41 Instrucciones De Uso

6. Operation

N O T E :
Please note that this device is available in standard
and pro modes (
† section 6.2.2
and – "Pro mode").
† section 6.2.3
6.1 Controls
(† ig. 1)
No. Term
D. Rotary/push
Knob
E. Selector
switch

6.2 Display

N O T E :
Preset values are retained in each mode
(standard or pro mode)!

6.2.1 Overview of adjustable parameters

Position of the
selector switch
(E)
OFF
FREQUENCY
BRIGHT
MENU
10 EN
– "Standard mode"
Description
– Turn the knob to select the value and push to conirm.
The adjustment increment depends on the rotational speed.
– Turning the knob while pushing it simultaneously, the adjustment increment is effected in
steps of 100.
– The lash can be turned off by pushing the knob once and turned on again by pushing the
knob once again.
Choose between "OFF", "FREQUENCY", "BRIGHT", "MENU" and "LASER" by turning the
switch to the desired position.
Display
Internal
trigger
–
FPM
BRIGHT deg
PHASE deg
INT / EXT
Following functions are only available in the PRO mode:
1/min / Hz / FPM
MULT.
BRIGHT deg / μs
DELAY ms
DIV
SLOW
TRIG.
MEM IN
MEM OUT
Available with Functions of the rotary/push knob (D)
External
trigger
• •
• •
• •
•
• •
• •
•
•
•
• •
• •
Set value Select parameter
•
•
•
•
•
•
•
•
•
•
•
•
•