Operating Mode; Factory Reset - SKF TKRS 41 Instrucciones De Uso

6.2.5 Operating mode

The following operating modes may be displayed:
No. Position of the
selector switch (E)
BATTERY STATUS
BATTERY STATUS
BATTERY STATUS
LASER / EXT /
SLOW
LASER / EXT /
SLOW
N O T E :
The symbol of a parameter that differs from the
factory settings will lash during operation.
N O T E :
The stroboscope will be automatically switched off
after 15 minutes of running on battery power!
18 EN
Display

6.3 Factory reset

N O T E :
To reset the factory settings, press and hold the
rotary/push knob (D) for at least 5 seconds.
Description
Fully charged
Half charged
Charging (symbol will lash)
The trigger frequency is below the
measurement range.
The trigger frequency is above the
measurement range.