Laser Modes - SKF TKRS 41 Instrucciones De Uso

6.2.4 Laser modes

N O T E :
The stroboscope TKRS 41 features both a higher
number of LEDs as well as a laser.
W A R N I N G :
Risk of injury!
• Laser class 2
The stroboscope TKRS 41 is itted with a class 2
laser. The laser beam can damage eyes. For this
reason, do not stare directly at the laser beam
and never direct it at people or animals.
No. Position of the
selector switch (E)
LASER
LASER
LASER
The stroboscope TKRS 41 features a laser
in addition to the aforementioned settings
(
† section 6.2.2
To use the laser, you must irst afix a relective
marking onto the object to be measured. Direct the
stroboscope at the rotating object. The laser will
recognise the marking and measure the rotations.
To enable the integrated "Auto Save" feature, direct
the stroboscope at the rotating object for at least
2 seconds. The measured frequency will be stored.
After switching to the parameter "Internal trigger",
the stroboscope lashes at this frequency and it can
now be used for all other settings.
Display
– ).
and 6.2.3
Description
The trigger frequency is 3 000 lashes per minute,
determined by the relective laser beam.
The trigger frequency is below the
measurement range.
The trigger frequency is above the
measurement range.
EN 17